Jul 23, 2019  
2017-2018 Catalog 
    
2017-2018 Catalog [ARCHIVED CATALOG]

Course Descriptions


Understanding Course Requirements

Guilford Technical Community College is committed to student success. The college offers courses for students who need additional academic preparation. GTCC requires that students are proficient in reading, writing, and math or a combination of these basic skills before they can enroll in most college courses.


The following is an alpha-numeric listing of course descriptions for all curriculum programs. A three-letter course prefix identifies the program area in which a course is offered. The three or four digit course number identifies a specific course within a program. The course title introduces the subject matter of a course. The group of numbers to the right of a course title gives, in order of information, the lecture hours per week, laboratory and/or shop hours per week, clinic and/or cooperative work hours per week, and the last digit gives the semester credit hours awarded for successful completion of the course.

 

Art

  
  •  

    ART 114 Art History Survey I

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course covers the development of art forms from ancient times to the Renaissance. Emphasis is placed on content, terminology, design, and style. Upon completion, students should be able to demonstrate an historical understanding of art as a product reflective of human social development. This course has been approved for transfer under the CAA as a general education course in Humanities/Fine Arts.  This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    ART 115 Art History Survey II

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course covers the development of art forms from the Renaissance to the present. Emphasis is placed on content, terminology, design, and style. Upon completion, students should be able to demonstrate an historical understanding of art as a product reflective of human social development. This course has been approved for transfer under the CAA as a general education course in Humanities/Fine Arts.  This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    ART 121 Two-Dimensional Design

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course introduces the elements and principles of design as applied to two-dimensional art. Emphasis is placed on the structural elements, the principles of visual organization, and the theories of color mixing and interaction. Upon completion, students should be able to understand and use critical and analytical approaches as they apply to two-dimensional visual art. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    ART 122 Three-Dimensional Design

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course introduces basic studio problems in three-dimensional visual design. Emphasis is placed on the structural elements and organizational principles as applied to mass and space. Upon completion, students should be able to apply three-dimensional design concepts. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in ART 121 .
  
  •  

    ART 131 Drawing I

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course introduces the language of drawing and the use of various drawing materials. Emphasis is placed on drawing techniques, media, and graphic principles. Upon completion, students should be able to demonstrate competence in the use of graphic form and various drawing processes. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    ART 132 Drawing II

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course continues instruction in the language of drawing and the use of various materials. Emphasis is placed on experimentation in the use of drawing techniques, media, and graphic materials. Upon completion, students should be able to demonstrate increased competence in the expressive use of graphic form and techniques. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in ART 131 .
  
  •  

    ART 240 Painting I

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course introduces the language of painting and the use of various painting materials. Emphasis is placed on the understanding and use of various painting techniques, media, and color principles. Upon completion, students should be able to demonstrate competence in the use of creative processes directed toward the development of expressive form. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    ART 241 Painting II

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course provides a continuing investigation of the materials, processes, and techniques of painting. Emphasis is placed on the exploration of expressive content using a variety of creative processes. Upon completion, students should be able to demonstrate competence in the expanded use of form and variety. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): ART 240 .
  
  •  

    ART 264 Digital Photography I

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course introduces digital photographic equipment, theory and processes. Emphasis is placed on camera operation, composition, computer photo manipulation and creative expression. Upon completion, students should be able to successfully expose, digitally manipulate, and print a well-conceived composition. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    ART 265 Digital Photography II

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course provides exploration of the concepts and processes of photo manipulation through complex composite images, special effects, color balancing and image/text integration. Emphasis is placed on creating a personal vision and style. Upon completion, students should be able to produce well-executed images using a variety of photographic and photo manipulative approaches. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): ART 264 .
  
  •  

    ART 281 Sculpture I

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course provides an exploration of the creative and technical methods of sculpture with focus on the traditional processes. Emphasis is placed on developing basic skills as they pertain to three-dimensional expression in various media. Upon completion, students should be able to show competence in variety of sculptural approaches. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    ART 282 Sculpture II

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 3
    This course builds on the visual and technical skills learned in ART 281. Emphasis is placed on developing original solutions to sculptural problems in a variety of media. Upon completion, students should be able to express individual ideas using the techniques and materials of sculpture. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): ART 281 .

Aerostructure Manufacturing and Repair

  
  •  

    ASM 110 Aerostructure Shop Prac

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course introduces specialized hand tools, equipment, aerostructure components, and assembly plant layouts commonly found in the aerostructure manufacturing industry. Emphasis is placed on precision instruments, identification of aerostructure components, and common procedures used in the manufacturing and repair of aerostructures. Upon completion, students should be able to demonstrate the proper use of tools and equipment common to the manufacturing and repair of aerostructure components. Pre-requisite(s): DRE 098  or EFL 074, EFL 084, and EFL 094 and DMA 010 DMA 020 ,  DMA 030  , DMA 040   and DMA 050 .
  
  •  

    ASM 111 Aero Industry Standards

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the aerospace industry’s standardized model for quality assurance in design, development and production. Emphasis is placed on how to prepare a process-oriented method of management to meet the quality standards prescribed for the aerospace industry. Upon completion, students should be able to demonstrate an understanding of the concepts and principles of quality assurance and apply them to the work environment. Pre-requisite(s): Take DRE 098  or EFL 074, EFL 084, and EFL 094 and DMA 010 DMA 020 ,  DMA 030  , DMA 040    and DMA 050 .
  
  •  

    ASM 112 Aero Assembly Methods I

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course introduces the planning, fabrication, and assembly methods used in aerostructure manufacturing and repair processes. Emphasis is placed on working in teams, fabrication, tooling and assembly processes, change management principles and configuration controls. Upon completion, students should be able to demonstrate an understanding of the concepts and principles used in the manufacturing, assembly and repair of aerostructures. Pre-requisite(s): Take ASM 110 ,  DRE 098  or EFL 074, EFL 084, and EFL 094 and DMA 010 DMA 020 ,  DMA 030  , DMA 040   and DMA 050 .  
  
  •  

    ASM 113 Aero Assembly Methods II

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course introduces the advanced-level planning, fabrication, and assembly methods used in aerostructure manufacturing and repair processes. Emphasis is placed on working in teams, advanced-level fabrication, tooling and assembly processes, change management principles, and configuration controls. Upon completion, students should be able to demonstrate an understanding of advanced-level concepts and principles used in the manufacturing, assembly and repair of aerostructure. Pre-requisite(s): ASM 112 .
  
  •  

    ASM 114 Aerostructures Composites

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces provides an overview of the manufacturing of non-metallic aerostructures including associated computer numerical control (CNC) machining. Emphasis is placed on composite materials technology, fiber and resin properties, lay-up and curing procedures, tooling concepts, process planning and materials. Upon completion, students should be able to demonstrate a thorough understanding of the fundamentals of composite structure fabrication methods, materials, and application techniques.
  
  •  

    ASM 115 Composite Repair Proced

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course is designed to provide students with general knowledge of techniques used to repair composite aerostructures. Emphasis is placed on procedures involving safe and effective finish removal, disassembling, and the repair and/or replacement of damaged composite components. Upon completion, students should be able to demonstrate proper and safe procedures required for the repair of composite aerostructure components. Pre-requisite(s): ASM 114 .
  
  •  

    ASM 116 Composite Material Test

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course is designed to provide students with general knowledge of the inspection process used during the repair of composite aerostructures. Emphasis is placed on composite material inspection procedures involving nondestructive inspection techniques and procedures. Upon completion, students should be able to demonstrate an understanding of proper and safe procedures involving nondestructive inspection.
  
  •  

    ASM 117 Aero Electrical Assemblies

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 5
    This course covers a variety of complex electrical and electronic sub-assemblies commonly utilized in manufactured aerostructures. Emphasis will be placed on electrical and electronic theory, symbols, wiring diagrams, utilization of production drawings, soldering, wiring techniques, connector location and identification, electrical hand tools, and installation of assembled components. Upon completion, students should be able to follow production drawings to accurately assemble and position wiring, electrical, and electronic components in jigs, fixtures, and aerostructures utilizing appropriate tools and procedures.
  
  •  

    ASM 210 Computer-Aided 3D Appl

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course introduces computer aided three-dimensional interactive application (CATIA) software used to develop computerized solid models, parts, and engineering drawings for the aerostructure manufacturing industry. Emphasis is placed on drawing, editing, file management, and plotting of components using CATIA software in an aerostructure manufacturing environment. Upon completion, students should be able to produce and plot computer-aided design (CAD) drawing using CATIA software in an aerostructure manufacturing environment.
  
  •  

    ASM 212 Aerostructure Join Mthds

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course provides an introduction to a wide variety of joining processes used in aerostructure manufacturing. Emphasis is placed on conducting technical research for proper process selection and exploring case study examples of industry joining processes for various aerostructure applications. Upon completion, students should be able to demonstrate an understanding of the process of joining composite and metal components using aerostructure assembly techniques and guidelines. Pre-requisite(s): ASM 116 .
  
  •  

    ASM 215 Aero Sheet Metal Struct

    Lecture: 1 Lab: 8 Clinic: 0 Credits: 5
    This course covers tools, maintenance and repair practices employed on modern metallic aircraft. Topics include metallurgy, fastener types and selection, and acceptable practices of repair and maintenance of sheet metal structures. Upon completion, students should be able to select the proper fasteners and procedures to effect proper metallic structure repairs. Pre-requisite(s): Take ASM 113 DRE 098  or EFL 074, EFL 084, and EFL 094 and DMA 010 DMA 020 ,  DMA 030  , DMA 040   and DMA 050 .

Astronomy

  
  •  

    AST 111 Descriptive Astronomy

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces an overall view of modern astronomy. Topics include an overview of the solar system, the sun, stars, galaxies, and the larger universe. Upon completion, students should be able to demonstrate an understanding of the universe around them. This course has been approved for transfer under the CAA as a general education course in Natural Science.  This is a Universal General Education Transfer Component (UGETC) course. Co-requisite(s): AST 111A .
  
  •  

    AST 111A Descriptive Astronomy Lab

    Lecture: 0 Lab: 2 Clinic: 0 Credits: 1
    This course is a laboratory to accompany AST 111 . Emphasis is placed on laboratory experiences which enhance the materials presented in AST 111  and which provide practical experience. Upon completion, students should be able to demonstrate an understanding of the universe around them. This course has been approved for transfer under the CAA as a general education course in Natural Science.  This is a Universal General Education Transfer Component (UGETC) course. Co-requisite(s): AST 111 .
  
  •  

    AST 151 General Astronomy I

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the science of modern astronomy with a concentration on the solar system. Emphasis is placed on the history and physics of astronomy and an introduction to the solar system, including the planets, comets, and meteors. Upon completion, students should be able to demonstrate a general understanding of the solar system. This course has been approved for transfer under the CAA as a general education course in Natural Science.  This is a Universal General Education Transfer Component (UGETC) course. Co-requisite(s): AST 151A .
  
  •  

    AST 151A General Astronomy I Lab

    Lecture: 0 Lab: 2 Clinic: 0 Credits: 1
    This course is a laboratory to accompany AST 151 . Emphasis is placed on laboratory experiences which enhance the materials presented in AST 151  and which provide practical experience. Upon completion, students should be able to demonstrate a general understanding of the solar system. This course has been approved for transfer under the CAA as a general education course in Natural Science.  This is a Universal General Education Transfer Component (UGETC) course. Co-requisite(s): AST 151 .
  
  •  

    AST 152 General Astronomy II

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is a continuation of AST 151  with primary emphasis beyond the solar system. Topics include the sun, stars, galaxies, and the larger universe, including cosmology. Upon completion, students should be able to demonstrate a working knowledge of astronomy. This course has been approved for transfer under the CAA as a general education course in Natural Science. Pre-requisite(s): AST 151 . Co-requisite(s): AST 152A .
  
  •  

    AST 152A General Astronomy II Lab

    Lecture: 0 Lab: 2 Clinic: 0 Credits: 1
    This course is a laboratory to accompany AST 152 . Emphasis is placed on laboratory experiences which enhance the materials presented in AST 152  and which provide practical experience. Upon completion, students should be able to demonstrate a working knowledge of astronomy. This course has been approved for transfer under the CAA as a general education course in Natural Science. Pre-requisite(s): AST 151 . Co-requisite(s): AST 152 .
  
  •  

    AST 251 Observational Astronomy

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers the operation of the telescope and related observatory equipment. Emphasis is placed on the use of the telescope and related observatory equipment, including techniques of data collection, measurements, and data analysis. Upon completion, students should be able to set up a telescope and use the coordinate system to locate objects, collect data, and make measurements with the telescope. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): AST 111  or AST 152 .

Automation and Robotics

  
  •  

    ATR 112 Intro to Automation

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course introduces the basic principles of automated systems and describes the tasks that technicians perform on the job. Topics include the history, development, and current applications of robots and automated systems including their configuration, operation, components, and controls. Upon completion, students should be able to understand the basic concepts of automation and robotic systems.
  
  •  

    ATR 211 Robot Programming

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course provides the operational characteristics of robots and programming in their respective languages. Topics include robot programming, teach pendants, PLC integration, operator interfaces, the interaction of external sensors, machine vision, network systems, and other related devices. Upon completion, students should be able to program and demonstrate the operation of various robots. Pre-requisite(s): ATR 112 .
  
  •  

    ATR 212 Industrial Robots

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers the operation of industrial robots. Topics include the classification of robots, activators, grippers, work envelopes, computer interfaces, overlapping work envelopes, installation, and programming. Upon completion, students should be able to install, program, and troubleshoot industrial robots.

Automotive

  
  •  

    AUB 111 Painting and Refinishing I

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course introduces the proper procedures for using automotive refinishing equipment and materials in surface preparation and application. Topics include federal, state, and local regulations, personal safety, refinishing equipment and materials, surface preparation, masking, application techniques, and other related topics. Upon completion, students should be able to identify and use proper equipment and materials in refinishing following accepted industry standards. Pre-requisite(s): Enrollment in the Collision Repair & Refinishing Program and DRE 097  or EFL 074 , EFL 084 , and EFL 094 . Co-requisite(s): AUB 121 .
  
  •  

    AUB 112 Painting and Refinishing II

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course covers advanced painting techniques and technologies with an emphasis on identifying problems encountered by the refinishing technician. Topics include materials application, color matching, correction of refinishing problems, and other related topics. Upon completion, students should be able to perform spot, panel, and overall refinishing repairs and identify and correct refinish problems. Pre-requisite(s): AUB 111 .
  
  •  

    AUB 114 Special Finishes

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces multistage finishes, custom painting, and protective coatings. Topics include base coats, advanced intermediate coats, clear coats, and other related topics. Upon completion, students should be able to identify and apply specialized finishes based on accepted industry standards. Pre-requisite(s): AUB 111 .
  
  •  

    AUB 121 Non-Structural Damage I

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course introduces safety, tools, and the basic fundamentals of body repair. Topics include shop safety, damage analysis, tools and equipment, repair techniques, materials selection, materials usage, and other related topics. Upon completion, students should be able to identify and repair minor direct and indirect damage including removal/repairing/replacing of body panels to accepted standards. Pre-requisite(s): Enrollment in the Collision Repair & Refinishing Program and DRE 097  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    AUB 122 Non-Structural Damage II

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course covers safety, tools, and advanced body repair. Topics include shop safety, damage analysis, tools and equipment, advanced repair techniques, materials selection, materials usage, movable glass, and other related topics. Upon completion, students should be able to identify and repair or replace direct and indirect damage to accepted standards including movable glass and hardware. Pre-requisite(s): AUB 121 .
  
  •  

    AUB 131 Structural Damage I

    Lecture: 2 Lab: 4 Clinic: 0 Credits: 4
    This course introduces safety, equipment, structural damage analysis, and damage repairs. Topics include shop safety, design and construction, structural analysis and measurement, equipment, structural glass, repair techniques, and other related topics. Upon completion, students should be able to analyze and perform repairs to a vehicle which has received light/moderate structural damage. Pre-requisite(s): Enrollment in the Collision Repair & Refinishing Program and DRE 097  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    AUB 132 Structural Damage II

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course provides an in-depth study of structural damage analysis and repairs to vehicles that have received moderate to heavy structural damage. Topics include shop safety, structural analysis and measurement, equipment, structural glass, advanced repair techniques, structural component replacement and alignment, and other related topics. Upon completion, students should be able to analyze and perform repairs according to industry standards. Pre-requisite(s): AUB 131 .
  
  •  

    AUB 136 Plastics and Adhesives

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course covers safety, plastic and adhesive identification, and the various repair methods of automotive plastic components. Topics include safety, identification, preparation, material selection, and the various repair procedures including refinishing. Upon completion, students should be able to identify, remove, repair, and/or replace automotive plastic components in accordance with industry standards. Pre-requisite(s): AUB 121 .
  
  •  

    AUB 141 Mechanical & Electrical Components I

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers the basic principles of automotive mechanical and electrical components. Topics include personal and environmental safety and suspension and steering, electrical, brake, heating and air-conditioning, cooling, drive train, and restraint systems. Upon completion, students should be able to identify system components and perform basic system diagnostic checks and/or repairs according to industry standards.
  
  •  

    AUB 150 Automotive Detailing

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers the methods and procedures used in automotive detailing facilities. Topics include safety, engine, interior and trunk compartment detailing, buffing/polishing exterior surfaces, and cleaning and reconditioning exterior trim, fabrics, and surfaces. Upon completion, students should be able to improve the overall appearance of a vehicle. Pre-requisite(s): AUB 112 .
  
  •  

    AUB 160 Body Shop Operations

    Lecture: 1 Lab: 0 Clinic: 0 Credits: 1
    This course introduces the day-to-day operations of autobody repair facilities. Topics include work habits and ethics, customer relations, equipment types, materials cost and control, policies and procedures, shop safety and liabilities, and other related topics. Upon completion, students should be able to understand the general operating policies and procedures associated with an autobody repair facility. Pre-requisite(s): AUB 122 .
  
  •  

    AUB 162 Autobody Estimating

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course provides a comprehensive study of autobody estimating. Topics include collision damage analysis, industry regulations, flat-rate and estimated time, and collision estimating manuals. Upon completion, students should be able to prepare and interpret a damage report.
  
  •  

    AUC 117 Custom Airbrushing

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course covers custom airbrushing techniques, finish application, and equipment selection. Emphasis is placed on the design and application of custom airbrushing techniques and proper equipment maintenance. Upon completion, students should be able to design and apply custom air brush graphics using a variety of techniques.
  
  •  

    AUT 113 Automotive Servicing I

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course is a lab used as an alternative to co-op placement. Emphasis is placed on shop operations, troubleshooting, testing, adjusting, repairing, and replacing components using appropriate test equipment and service information. Upon completion, students should be able to perform a variety of automotive repairs using proper service procedures and to operate appropriate equipment. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 116 Engine Repair

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information. Upon completion, students should be able to perform basic diagnosis, measurement and repair of automotive engines using appropriate tools, equipment, procedures, and service information. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 116A Engine Repair Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information. Upon completion, students should be able to perform basic diagnosis, measurement and repair of automotive engines using appropriate tools, equipment, procedures, and service information. Co-requisite(s): AUT 116 .
  
  •  

    AUT 123 Powertrain Diagnosis & Service

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers the diagnosis, repair and service of the vehicle powertrain and related systems. Topics include fundamental operating principles of engines and transmissions and use of proper service procedures for diagnosis, service and removal and replacement of major components. Upon completion, students should be able to perform basic service and diagnosis of the powertrain and related systems, and to perform in vehicle repairs and remove and replace components. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 141 Suspension & Steering Systems

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers principles of operation, types, and diagnosis/repair of suspension and steering systems to include steering geometry. Topics include manual and power steering systems and standard and electronically controlled suspension and steering systems. Upon completion, students should be able to service and repair steering and suspension components, check and adjust alignment angles, repair tires, and balance wheels. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 141A Suspension & Steering Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include manual and power steering systems and standard and electronically controlled suspension and steering systems. Upon completion, students should be able to service and repair steering and suspension components, check and adjust alignment angles, repair tires, and balance wheels. Co-requisite(s): AUT 141 .
  
  •  

    AUT 151 Brake Systems

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers principles of operation and types, diagnosis, service, and repair of brake systems. Topics include drum and disc brakes involving hydraulic, vacuum boost, hydra-boost, electrically powered boost, and anti-lock and parking brake systems. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 151A Brakes Systems Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include drum and disc brakes involving hydraulic, vacuum-boost, hydra-boost, electrically powered boost, and anti-lock, parking brake systems and emerging brake systems technologies. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems. Co-requisite(s): AUT 151 .
  
  •  

    AUT 163 Advanced Automotive Electricity

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers electronic theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of electronics, lighting, gauges, horn, wiper, accessories, and body modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair wiring, lighting, gauges, accessories, modules, and electronic concerns. Pre-requisite(s): TRN 120 .
  
  •  

    AUT 163A Advanced Automotive Electricity Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, troubleshooting and emerging electrical/electronic systems technologies. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair wiring, lighting, gauges, accessories, modules, and electronic concerns. Co-requisite(s): AUT 163 .
  
  •  

    AUT 181 Engine Performance I

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers the introduction, theory of operation, and basic diagnostic procedures required to restore engine performance to vehicles equipped with complex engine control systems. Topics include an overview of engine operation, ignition components and systems, fuel delivery, injection components and systems and emission control devices. Upon completion, students should be able to describe operation and diagnose/repair basic ignition, fuel and emission related driveability problems using appropriate test equipment/service information. Pre-requisite(s): TRN 120 .
  
  •  

    AUT 181A Engine Performance I Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include overviews of engine operation, ignition components and systems, fuel delivery, injection components and systems and emission control devices and emerging engine performance technologies. Upon completion, students should be able to describe operation and diagnose/repair basic ignition, fuel and emission related driveability problems using appropriate test equipment/service information. Co-requisite(s): AUT 181 .
  
  •  

    AUT 183 Engine Performance II

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course covers study of the electronic engine control systems, the diagnostic process used to locate engine performance concerns, and procedures used to restore normal operation. Topics will include currently used fuels and fuel systems, exhaust gas analysis, emission control components and systems, OBD II (on-board diagnostics) and inter-related electrical/electronic systems. Upon completion, students should be able to diagnose and repair complex engine performance concerns using appropriate test equipment and service information. Pre-requisite(s): AUT 181 .
  
  •  

    AUT 213 Automotive Servicing 2

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course is a lab used as an alternative to co-op placement. Emphasis is placed on shop operations, troubleshooting, testing, adjusting, repairing, and replacing components using appropriate test equipment and service information. Upon completion, students should be able to perform a variety of automotive repairs using proper service procedures and to operate appropriate equipment. Pre-requisite(s): AUT 113 .
  
  •  

    AUT 221 Auto Transmissions/Transaxles

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drive trains and the use of appropriate service tools and equipment. Upon completion, students should be able to explain operational theory, diagnose and repair automatic drive trains. Pre-requisite(s): TRN 120 .
  
  •  

    AUT 221A Auto Transmissions/Transaxles Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drive trains and the use of appropriate service tools and equipment. Upon completion, students should be able to diagnose and repair automatic drive trains. Co-requisite(s): AUT 221 .
  
  •  

    AUT 231 Man Trans/Axles/Drivetrains

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course covers the operation, diagnosis, and repair of manual transmissions/transaxles, clutches, driveshafts, axles, and final drives. Topics include theory of torque, power flow, and manual drive train servicing and repair using appropriate service information, tools, and equipment. Upon completion, students should be able to explain operational theory, diagnose and repair manual drive trains. Pre-requisite(s): TRN 110 .
  
  •  

    AUT 231A Man Trans/Axles/Drivetrains Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course is an optional lab for the program that needs to meet NATEF hour standards but does not have a co-op component in the program. Topics include manual drive train diagnosis, service and repair using appropriate service information, tools, and equipment. Upon completion, students should be able to diagnose and repair manual drive trains. Co-requisite(s): AUT 231 .
  
  •  

    AUT 281 Adv Engine Performance

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course utilizes service information and specialized test equipment to diagnose and repair power train control systems. Topics include computerized ignition, fuel and emission systems, related diagnostic tools and equipment, data communication networks, and service information. Upon completion, students should be able to perform diagnosis and repair. Pre-requisite(s): Grade of C or better in AUT 183 .

Aviation

  
  •  

    AVI 110 Aviation Maintenance-General

    Lecture: 10 Lab: 15 Clinic: 0 Credits: 15
    This course introduces general subjects related to all aspects of aircraft maintenance. Topics include mechanic privileges/limitations; math and physics; basic electricity; aircraft drawings; maintenance forms; fluid lines/fittings; weight and balance; corrosion control; and ground operations. Upon completion, students should be prepared to pass the FAA knowledge, oral, and practical exams for the general portion of the mechanic’s certificate with either the airframe or powerplant ratings. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094  and DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050 .
  
  •  

    AVI 120 Airframe Maintenance I

    Lecture: 6 Lab: 18 Clinic: 0 Credits: 12
    This course covers airframe structures, systems, and components with an emphasis on the different types of aircraft construction and repair methods. Topics include aircraft non-metallic (composite), sheet metal, and wood structures; welding; covering and finishes (dope and fabric); assembly and rigging; and communication and navigation systems. Students should gain the knowledge and skills in these areas to prepare them for the airframe rating for the FAA mechanic’s certificate. Pre-requisite(s): AVI 110 .
  
  •  

    AVI 130 Airframe Maintenance II

    Lecture: 6 Lab: 9 Clinic: 0 Credits: 9
    This course deals entirely with airframe systems and components. Topics include aircraft electrical, hydraulic, pneumatic, landing gear, position, warning, and fuel systems. Upon completion of the course, the student should be prepared to pass the applicable portions of the knowledge, oral, and practical tests of the airframe rating for the FAA mechanic’s certificate. Pre-requisite(s): AVI 110  
  
  •  

    AVI 230 Airframe Maintenance III

    Lecture: 4 Lab: 9 Clinic: 0 Credits: 7
    In this final course of the airframe series, the emphasis is on systems and components, culminating with the airframe inspection portion of the course. In addition to the inspection aspects, instrument, cabin environmental control, fire protection, and ice and rain control systems are covered. The student should be prepared to take the applicable portions of the written, oral, and practical examination for the airframe rating on the FAA mechanic’s certificate. Pre-requisite(s): AVI 110 .
  
  •  

    AVI 240 Powerplant Maintenance I

    Lecture: 3 Lab: 9 Clinic: 0 Credits: 6
    This first course in the powerplant series covers theoretical and practical aspects of the two major types of aircraft propulsion systems, piston and jet engines. Auxiliary power units are also covered, including their relationship to the systems they operate. Upon completion, the student should be knowledgeable of aircraft engines to include maintenance and operation at the level required by the FAA to qualify for a powerplant rating on a mechanic’s certificate. Pre-requisite(s): AVI 110 .
  
  •  

    AVI 250 Powerplant Maintenance II

    Lecture: 10 Lab: 15 Clinic: 0 Credits: 15
    This course emphasizes engine systems and components. Topics include engine instruments and fire protection, electrical, lubrication, fuel, ignition, starting, and fuel metering systems. Students completing this course should be capable of passing appropriate portions of the FAA knowledge, oral, and practical tests for the powerplant rating. Pre-requisite(s): AVI 110 .
  
  •  

    AVI 260 Powerplant Maintenance III

    Lecture: 5 Lab: 12 Clinic: 0 Credits: 9
    This final course of the powerplant series covers engine systems and components; propellers and unducted fans; and induction, airflow, cooling, exhaust, and reverser systems. The course culminates with engine inspections. The student should be prepared to pass the applicable portions of the knowledge, oral, and practical exams for the powerplant rating at the completion of this course. Pre-requisite(s): AVI 110 .

Biology

  
  •  

    BIO 094 Concepts of Human Biology

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course focuses on fundamental concepts of human biology. Topics include terminology, biochemistry, cell biology, tissues, body systems, and other related topics. Upon completion, students should be able to demonstrate preparedness for college-level anatomy and physiology courses. Co-requisite(s): DRE 098 .
  
  •  

    BIO 106 Introduction to Anatomy/Physiology/Microbiology

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers the fundamental and principle concepts of human anatomy and physiology and microbiology. Topics include an introduction to the structure and function of cells, tissues, and human organ systems, and an overview of microbiology, epidemiology, and control of microorganisms. Upon completion, students should be able to identify structures and functions of the human body and describe microorganisms and their significance in health and disease. This is a certificate and diploma level course.
  
  •  

    BIO 110 Principles of Biology

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course provides a survey of fundamental biological principles for non-science majors. Emphasis is placed on basic chemistry, cell biology, metabolism, genetics, taxonomy, evolution, ecology, diversity, and other related topics. Upon completion, students should be able to demonstrate increased knowledge and better understanding of biology as it applies to everyday life. This course has been approved for transfer under the CAA as a general education course in Natural Science.​ Student will not receive credit for both BIO 110 and BIO 111.  This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): C or better in DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BIO 111 General Biology I

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course introduces the principles and concepts of biology. Emphasis is placed on basic biological chemistry, cell structure and function, metabolism and energy transformation, genetics, evolution, classification, and other related topics. Upon completion, students should be able to demonstrate understanding of life at the molecular and cellular levels. A recent high school or college chemistry class or CHM 092  is advised. This course has been approved for transfer under the CAA as a general education course in Natural Science. Student will not receive credit for both BIO 110 and BIO 111.  This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): C or better in DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BIO 112 General Biology II

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course is a continuation of BIO 111 . Emphasis is placed on organisms, biodiversity, plant and animal systems, ecology, and other selected topics. Upon completion, students should be able to demonstrate comprehension of life at the organismal and ecological levels. This course has been approved for transfer under the CAA as a general education course in Natural Science. This is a Universal General Education Transfer Component (UGETC) course.  The laboratory component of this course includes cutting up preserved animal specimens. Pre-requisite(s): BIO 111 .
  
  •  

    BIO 140 Environmental Biology

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces environmental processes and the influence of human activities upon them. Topics include ecological concepts, population growth, natural resources, and a focus on current environmental problems from scientific, social, political, and economic perspectives. Upon completion, students should be able to demonstrate an understanding of environmental interrelationships and of contemporary environmental issues. This course has been approved for transfer under the CAA as a general education course in Natural Science.
  
  •  

    BIO 140A Environmental Biology Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course provides a laboratory component to complement BIO 140 . Emphasis is placed on laboratory and field experience. Upon completion, students should be able to demonstrate a practical understanding of environmental interrelationships and of contemporary environmental issues. This course has been approved for transfer under the CAA as a general education course in Natural Science. Co-requisite(s): BIO 140 .
  
  •  

    BIO 163 Basic Anatomy and Physiology

    Lecture: 4 Lab: 2 Clinic: 0 Credits: 5
    This course provides a basic study of the structure and function of the human body. Topics include a basic study of the body systems as well as an introduction to homeostasis, cells, tissues, nutrition, acid-base balance, and electrolytes. Upon completion, students should be able to demonstrate a basic understanding of the fundamental principles of anatomy and physiology and their interrelationships. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in DRE 098  or EFL 074 , EFL 084 , and EFL 094 , or BIO 094 .    
  
  •  

    BIO 165 Anatomy and Physiology I

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course is the first of a two-course sequence which provides a comprehensive study of the anatomy and physiology of the human body. Topics include the structure, function, and interrelationship of organ systems with emphasis on the processes which maintain homeostasis. Upon completion, students should be able to demonstrate an in-depth understanding of principles of anatomy and physiology and their interrelationships. BIO 165  and BIO 166  should be completed in the same college to receive transfer credit. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BIO 166 Anatomy and Physiology II

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course is the second in a two-course sequence which provides a comprehensive study of the anatomy and physiology of the human body. Topics include the structure, function, and interrelationship of organ systems with emphasis on the processes which maintain homeostasis. Upon completion, students should be able to demonstrate an in-depth understanding of principles of anatomy and physiology and the interrelationships of all body systems. BIO 165  and BIO 166  should be completed in the same college to receive transfer credit. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in BIO 165  taken at GTCC.
  
  •  

    BIO 168 Anatomy and Physiology I

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course provides a comprehensive study of the anatomy and physiology of the human body. Topics include body organization, homeostasis, cytology, histology, and the integumentary, skeletal, muscular, and nervous systems and special senses. Upon completion, students should be able to demonstrate an in-depth understanding of principles of anatomy and physiology and their interrelationships.  This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  •  

    BIO 169 Anatomy and Physiology II

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course provides a continuation of the comprehensive study of the anatomy and physiology of the human body. Topics include the endocrine, cardiovascular, lymphatic, respiratory, digestive, urinary, and reproductive systems as well as metabolism, nutrition, acid-base balance, and fluid and electrolyte balance. Upon completion, students should be able to demonstrate an in-depth understanding of principles of anatomy and physiology and their interrelationships.  This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 168 .
  
  •  

    BIO 175 General Microbiology

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers principles of microbiology with emphasis on microorganisms and human disease. Topics include an overview of microbiology and aspects of medical microbiology, identification and control of pathogens, disease transmission, host resistance, and immunity. Upon completion, students should be able to demonstrate knowledge of microorganisms and the disease process as well as aseptic and sterile techniques. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 110 , BIO 111 , BIO 163 , BIO 165  or BIO 168.
  
  •  

    BIO 250 Genetics

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course covers principles of prokaryotic and eukaryotic cell genetics. Emphasis is placed on the molecular basis of heredity, chromosome structure, patterns of Mendelian and non-Mendelian inheritance, evolution, and biotechnological applications. Upon completion, students should be able to recognize and describe genetic phenomena and demonstrate knowledge of important genetic principles. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 112 .
  
  •  

    BIO 265 Cell Biology

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course provides an in-depth study of cellular organization and communication, biochemical cell processes, and cellular growth, replication and death. Topics include organelle structure and function, nucleic acid and protein synthesis, gene organization and regulation, cell signaling mechanisms, bioenergetics, cell motility and apoptosis. Upon completion, students should be able to demonstrate knowledge of cell structure and function and lab skills including microscopy, cell culture, and molecular biology techniques. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 111 , BIO 275 , or BIO 280 .
  
  •  

    BIO 275 Microbiology

    Lecture: 3 Lab: 3 Clinic: 0 Credits: 4
    This course covers principles of microbiology and the impact these organisms have on man and the environment. Topics include the various groups of microorganisms, their structure, physiology, genetics, microbial pathogenicity, infectious diseases, immunology, and selected practical applications. Upon completion, students should be able to demonstrate knowledge and skills including microscopy, aseptic technique, staining, culture methods, and identification of microorganisms. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 110 , BIO 111 , BIO 163 , BIO 165 , or BIO 168.
  
  •  

    BIO 280 Biotechnology

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course provides experience in selected laboratory procedures. Topics include proper laboratory techniques in biology and chemistry. Upon completion, students should be able to identify laboratory techniques and instrumentation in basic biotechnology. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): BIO 111 , CHM 131 , or CHM 151 .

Blueprint Reading

  
  •  

    BPR 111 Print Reading

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces the basic principles of print reading. Topics include line types, orthographic projections, dimensioning methods, and notes. Upon completion, students should be able to interpret basic prints and visualize the features of a part or system. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BPR 130 Print Reading-Construction

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course covers the interpretation of prints and specifications that are associated with design and construction projects. Topics include interpretation of documents for foundations, floor plans, elevations, and related topics. Upon completion, students should be able to read and interpret construction prints and documents.
  
  •  

    BPR 135 Schematics & Diagrams

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course introduces schematics and diagrams used in a variety of occupations. Topics include interpretation of wiring diagrams, assembly drawings, exploded views, sectional drawings, and service manuals, specifications, and charts. Upon completion, students should be able to research and locate components and assemblies denoting factory specifications and requirements from service and repair manuals.
  
  •  

    BPR 221 Interpretation of GD&T

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course introduces dimensioning and tolerancing standards as established by ANSI and ISO 9000. Topics include dimensioning, symbols and terms, application of tolerances and limits, tolerances of position and form, and the advantages of geometric concepts. Upon completion, students should be able to interpret blueprints that utilize the GD&T system. Pre-requisite(s): MAC 132 .

Business

  
  •  

    BUS 110 Introduction to Business

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides a survey of the business world. Topics include the basic principles and practices of contemporary business. Upon completion, students should be able to demonstrate an understanding of business concepts as a foundation for studying other business subjects. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BUS 115 Business Law I

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the student to the legal and ethical framework of business. Contracts, negotiable instruments, the law of sales, torts, crimes, constitutional law, the Uniform Commercial Code, and the court systems are examined. Upon completion the student should be able to identify legal and ethical issues that arise in business decisions and the laws that apply to them. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094  and DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050 .
  
  •  

    BUS 121 Business Math

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers fundamental mathematical operations and their application to business problems. Topics include payroll, pricing, interest and discount, commission, taxes, and other pertinent uses of mathematics in the field of business. Upon completion, students should be able to apply mathematical concepts to business. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050 .
  
  •  

    BUS 125 Personal Finance

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides a study of individual and family financial decisions. Emphasis is placed on building useful skills in buying, managing finances, increasing resources, and coping with current economic conditions. Upon completion, students should be able to develop a personal financial plan.
  
  •  

    BUS 137 Principles of Management

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is designed to be an overview of the major functions of management. Emphasis is placed on planning, organizing, controlling, directing, and communicating. Upon completion, students should be able to work as contributing members of a team utilizing these functions of management. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): DRE 098  or EFL 074 , EFL 084 , and EFL 094 .
  
  •  

    BUS 151 People Skills

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the basic concepts of identity and communication in the business setting. Topics include self-concept, values, communication styles, feelings and emotions, roles versus relationships, and basic assertiveness, listening, and conflict resolution. Upon completion, students should be able to distinguish between unhealthy, self-destructive, communication patterns and healthy, non-destructive, positive communication patterns.
  
  •  

    BUS 153 Human Resource Management

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the functions of personnel/human resource management within an organization. Topics include equal opportunity and the legal environment, recruitment and selection, performance appraisal, employee development, compensation planning, and employee relations. Upon completion, students should be able to anticipate and resolve human resource concerns.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 -> 12