2016-2017 Catalog 
    
    May 16, 2024  
2016-2017 Catalog [ARCHIVED CATALOG]

Course Descriptions


Understanding Course Requirements

Guilford Technical Community College is committed to student success. The college offers courses for students who need additional academic preparation. GTCC requires that students are proficient in reading, writing, and math or a combination of these basic skills before they can enroll in most college courses.


The following is an alpha-numeric listing of course descriptions for all curriculum programs. A three-letter course prefix identifies the program area in which a course is offered. The three or four digit course number identifies a specific course within a program. The course title introduces the subject matter of a course. The group of numbers to the right of a course title gives, in order of information, the lecture hours per week, laboratory and/or shop hours per week, clinic and/or cooperative work hours per week, and the last digit gives the semester credit hours awarded for successful completion of the course.

 

Legal Education

  
  • LEX 260 Bankruptcy and Collections

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides an overview of the laws of bankruptcy and the rights of creditors and debtors. Topics include bankruptcy procedures and estate management, attachment, claim and delivery, repossession, foreclosure, collection, garnishment, and post-judgment collection procedure. Upon completion, students should be able to prepare and file bankruptcy forms, collection letters, statutory liens, and collection of judgments. Pre-requisite(s): LEX 120.  
  
  • LEX 270 Law Office Mgt/Technology

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course provides an overview of law office management and organization. Topics include office forms, filing systems, billing/time keeping, computer systems, calendar systems, library administration, case management, office/personnel procedures, ethics, and technology. Upon completion, students should be able to set up and maintain various law office systems, monitor case progress, and supervise non-lawyer personnel. Pre-requisite(s): LEX 120.  
  
  • LEX 271 Law Office Writing

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course covers the basics of writing for the law office including the drafting of general correspondence, the briefing of cases, and the preparation of settlement brochures. Emphasis is placed on legal vocabulary in the context of letter writing, briefing judicial opinions, and the preparation of the settlement brochure. Upon completion, students should be able to draft letters to clients, opposing counsel, government entities, and insurance companies and prepare the settlement brochure. Pre-requisite(s): LEX 120.  
  
  • LEX 280 Ethics and Professionalism

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course reinforces legal ethics and the role of the paralegal in a professional work environment. Topics include a review of ethics, employment opportunities, and search techniques; paralegal certification and other related topics. Upon completion, students should be able to understand the paralegal’s role in the ethical practice of law. Pre-requisite(s): LEX 120.  
  
  • LEX 283 Investigation

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course covers various aspects of civil and criminal investigation. Topics include locating witnesses, interviewing techniques, obtaining records, sketching and photographing accident scenes, collecting and preserving evidence, and preparation of exhibits for trial. Upon completion, students should be able to locate witnesses, prepare questionnaires, interview witnesses, obtain criminal/motor vehicle/medical/accident records, sketch scenes, and prepare exhibits. Pre-requisite(s): LEX 120.  
  
  • LEX 285 Workers’ Comp Law

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course covers the process of initiating and handling workers’ compensation claims. Emphasis is placed on reviewing and drafting relevant Industrial Commission forms. Upon completion, students should be able to interview clients, gather information, and draft documents related to workers’ compensation claims.
  
  • LEX 286 Medical Evidence Analysis

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course is designed to teach reading and analyzing medical records for legal evaluation of bodily injury and disability claims. Emphasis is placed on terminology, identifying, obtaining and reviewing medical records and study of the major systems of the human body. Upon completion, students will be able to compile, analyze and organize medical documents to support or disprove injury claims. Pre-requisite(s): LEX 120.  
  
  • LEX 288 Elder Law

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides an overview of laws especially relevant to older persons. Topics include healthcare decision-making, living wills, powers of attorney, financial and estate planning, government benefits, housing issues, elder abuse, and ethical considerations. Upon completion, students should be able to assist an attorney in addressing legal issues pertinent to the elderly.

Logistics

  
  • LOG 110 Introduction to Logistics

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides an overview of logistics. Topics include traffic management, warehousing, inventory control, material handling, global logistics, and the movement and storage of goods from raw materials sources to end consumers. Upon completion, students should be able to identify the different segments of logistics and use the terminology of the industry.
  
  • LOG 125 Transportation Logistics

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course covers the role and importance of the transportation industry. This is an overview of transportation emphasizing its environmental and sociological aspects, economic impact, services, regulatory guidelines, policies, and its future. Upon completion, students should be able to identify modes of transportation, interpret governing regulations, and describe the principles and terminology used in the transportation industry.
  
  • LOG 211 Distribution Management

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers the functions, techniques, and tools utilized in warehousing and distribution centers and their role in business and logistics. Emphasis is placed on warehouse and distribution center management, operations, productivity, software systems, picking, automation, cross docking, safety, security, material handling, benchmarking, and cost. Upon completion, students should be able to describe the role of warehouses and distribution centers, apply industry principles and terminology, and understand distribution productivity measures. Pre-requisite(s): LOG 110.  
  
  • LOG 215 Supply Chain Management

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course covers all activities involved in the flow of products and information between the suppliers, customers, producers, and service providers. Topics include acquiring, purchasing, manufacturing, assembling, and distributing goods and services throughout the supply chain organizations. Upon completion, students should be able to identify the supply chain units, describe the materials management processes, and prepare for the APICS CPIM examination. Pre-requisite(s): LOG 110.  
  
  • LOG 235 Import/Export Management

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the elements of import and export operations, from transportation to documentation, finance, and security and the effects on the global supply chain. Emphasis is placed on existing import/export regulations, customs documentation, intermodal transportation, foreign freight forwarders, global technology, and homeland security initiatives. Upon completion, students should be able to perform import/export operations, channels of distribution, implemented technologies, and associate with operating a secure supply chain. Pre-requisite(s): LOG 125.  
  
  • LOG 240 Purchasing Logistics

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the various aspects of purchasing, and their impact on materials management, supply chain, transportation, and global logistics processes. Emphasis is placed on the different methods of electronic sourcing, negotiating and pricing principles, and on the internal and external considerations associated with international logistics. Upon completion, students should be able to describe and apply the principles and terminology used in procurement including electronic data interchange services, purchasing and logistics systems. Pre-requisite(s): LOG 110.  
  
  • LOG 250 Advanced Global Logistics

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course covers the advanced application of global operations and logistics strategies, planning, technology, risk, and management necessary to cope with the global business environment. Emphasis is placed on an in-depth understanding of global sourcing, shipping, tracking, and e-logistics systems necessary to operate inbound/outbound logistics in a global market. Upon completion, students should be able to identify the different global markets and logistics technology available to process International inbound/outbound logistics transactions. Pre-requisite(s): LOG 125.  

Landscape Gardening

  
  • LSG 122 Spring Gardening Lab

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course provides familiarization with basic gardening techniques by performing practical hands-on exercises required for the spring season. Emphasis is placed on pruning, irrigation, planting, fertilizing, pest-control, equipment operation, turf maintenance, and landscape construction. Upon completion, students should be able to satisfactorily perform various practices essential to maintaining the landscape in the spring season.
  
  • LSG 123 Summer Gardening Lab

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course provides basic hands-on experience in summer gardening techniques. Emphasis is placed on pruning, irrigation, planting, fertilizing, pestcontrol, equipment operation, turf maintenance, landscape construction, and maintaining fruits and vegetables. Upon completion, students should be able to perform various techniques essential to maintaining the summer landscape.
  
  • LSG 231 Landscape Supervision

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course provides experience in planning, implementing, and supervising various landscape management projects. Emphasis is placed on supervisory skills, organizing, and scheduling. Upon completion, students should be able to supervise employees in various landscape management jobs. Pre-requisite(s): LSG 123  and HOR 161.  

Machining

  
  • MAC 111 Machining Technology I

    Lecture: 2 Lab: 12 Clinic: 0 Credits: 6
    This course introduces machining operations as they relate to the metalworking industry. Topics include machine shop safety, measuring tools, lathes, drilling machines, saws, milling machines, bench grinders, and layout instruments. Upon completion, students should be able to safely perform the basic operations of measuring, layout, drilling, sawing, turning, and milling. Pre-requisite(s): DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050  and DRE 097  or EFL 074,  EFL 084,   and EFL 094 . Co-requisite(s): MAC 114  and BPR 111.  
  
  • MAC 112 Machining Technology II

    Lecture: 2 Lab: 12 Clinic: 0 Credits: 6
    This course provides additional instruction and practice in the use of precision measuring tools, lathes, milling machines, and grinders. Emphasis is placed on setup and operation of machine tools including the selection and use of work holding devices, speeds, feeds, cutting tools, and coolants. Upon completion, students should be able to perform basic procedures on precision grinders and advanced operations of measuring, layout, drilling, sawing, turning, and milling. Pre-requisite(s): MAC 111.  
  
  • MAC 114 Introduction to Metrology

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course introduces the care and use of precision measuring instruments. Emphasis is placed on the inspection of machine parts and use of a wide variety of measuring instruments. Upon completion, students should be able to demonstrate the correct use of measuring instruments. Pre-requisite(s): DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050  and DRE 097  or EFL 074,  EFL 084,   and EFL 094 .
  
  • MAC 115 Grinding Operations

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course introduces surface and cylindrical grinding in the toolroom. Topics include safety and the basic setup and operation of surface and cylindrical grinding machines. Upon completion, students should be able to grind steps, slots, angles, radii, dress grinding wheels, and square blocks. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 .  MAC 114 , MAC 141 , and MAC 141A .
  
  • MAC 121 Introduction to CNC

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course introduces the concepts and capabilities of computer numerical control machine tools. Topics include setup, operation, and basic applications. Upon completion, students should be able to explain operator safety, machine protection, data input, program preparation, and program storage. Pre-requisite(s): DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050  and DRE 097  or EFL 074,  EFL 084,   and EFL 094 .
  
  • MAC 122 CNC Turning

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course introduces the programming, setup, and operation of CNC turning centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC turning centers. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 , MAC 121 , MAC 141 , and MAC 141A .
  
  • MAC 124 CNC Milling

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2


    This course introduces the manual programming, setup, and operation of CNC machining centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC machining centers. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 , MAC 121 MAC 141 , and MAC 141A .

     

  
  • MAC 131 Blueprint Reading/Mach I

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course covers the basic principles of blueprint reading and sketching. Topics include multi-view drawings; interpretation of conventional lines; and dimensions, notes, and thread notations. Upon completion, students should be able to interpret basic drawings, visualize parts, and make pictorial sketches. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 .
  
  • MAC 132 Blueprint Reading/Mach II

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces more complex industrial blueprints. Emphasis is placed on auxiliary views, section views, violations of true project, special views, applications of GD & T, and interpretation of complex parts. Upon completion, students should be able to read and interpret complex industrial blueprints. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074 , EFL 084 , and EFL 094 , and MAC 131 .
  
  • MAC 141 Machining Applications I

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course provides an introduction to a variety of material-working processes that are common to the machining industry. Topics include safety, process-specific machining equipment, measurement devices, set-up and layout instruments, and common shop practices. Upon completion, students should be able to safely demonstrate basic machining operations, accurately measure components, and effectively use layout instruments. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094. Co-requisite(s): MAC 114  and MAC 131 .
  
  • MAC 141A Machining Applications I Lab

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course provides an introduction to a variety of material-working processes, in a laboratory setting, that are common to the machining industry. Topics include safety, process-specific machining equipment, measurement devices, set-up and layout instruments, and common shop practices. Upon completion, students should be able to safely demonstrate basic machining operations, accurately measure components, and effectively use layout instruments. Pre-requisite(s): (DMA 010, DMA 020, DMA 030, DMA 040, and DMA 050) and DRE 097 or (EFL 074, EFL 084, and EFL 094)]. Co-requisite(s): MAC 114 , MAC 131 , and MAC 141 .
  
  • MAC 142 Machining Applications II

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course provides instruction in the wide variety of processes associated with machining. Topics include safety, equipment set-up, holding fixtures, tooling, cutting speeds and depths, metal properties, and proper finishes. Upon completion, students should be able to safely demonstrate advanced machining operations, accurately measure components, and produce accurate components with a proper finish. Pre-requisite(s): (DMA 010, DMA 020, DMA 030, DMA 040, and DMA 050) and DRE 097 or (EFL 074, EFL 084, and EFL 094)], MAC 141 , and MAC 141A .
  
  • MAC 142A Machining Applications II Lab

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course provides laboratory instruction in the wide variety of processes associated with machining. Topics include safety, equipment setup, holding fixtures, tooling, cutting speeds and depths, metal properties, and proper finishes. Upon completion, students should be able to safely demonstrate advanced machining operations, accurately measure components, and produce accurate components with a proper finish. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 141 , and MAC 141A . Co-requisite(s): MAC 142 .
  
  • MAC 143A Machining Applications III Lab

    Lecture: 0 Lab: 6 Clinic: 0 Credits: 2
    This course provides laboratory instruction in the field of advanced machining. Emphasis is placed on creating complex components, close-tolerance machining, precise measurement, and proper equipment usage. Upon completion, students should be able to demonstrate the ability to produce an accurately machined component with a quality finish using the proper machining process. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 141 , MAC 141A , MAC 142 , and MAC 142A .
  
  • MAC 151 Machining Calculations

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces basic calculations as they relate to machining occupations. Emphasis is placed on basic calculations and their applications in the machine shop. Upon completion, students should be able to perform basic shop calculations. Pre-requisite(s): DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050  and DRE 097  or EFL 074,  EFL 084,   and EFL 094 .
  
  • MAC 178 CNC Turning: Operator

    Lecture: 0 Lab: 2 Clinic: 0 Credits: 1
    This course introduces the operation of a qualified computer numerical controlled (CNC) program on a CNC controlled lathe. Topics include blueprints, tool offsets, speed and feed adjustment, G and M codes, program execution, cutting tools, holding devices and parts inspection. Upon completion, students should be able to safely demonstrate the operation of a CNC lathe. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 141 , MAC 131 , MAC 114 , and MAC 121 . Co-requisite(s): MAC 122 .
  
  • MAC 179 CNC Milling: Operator

    Lecture: 0 Lab: 2 Clinic: 0 Credits: 1
    This course introduces the operation of a qualified computer numerical controlled (CNC) program on a CNC controlled milling machine. Topics include blueprints, tool offsets, speed and feed adjustment, G and M codes, program execution, cutting tools, holding devices and parts inspection. Upon completion, students should be able to safely demonstrate the safe operation of a CNC milling machine. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 114 , MAC 121 MAC 131 , and MAC 141 . Co-requisite(s): MAC 124 .
  
  • MAC 180 CNC Turn: Prog Set & Op

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course introduces two-dimensional coordinate planes in a simple program used for the production of a part on a computer numerical controlled (CNC) lathe. Topics include blueprints, basic G and M codes, editor software, linear and circular interpolation, CNC lathes, process plan, Machinery Handbook, programming techniques and tool path. Upon completion, students should be able to demonstrate proper industry techniques for developing a simple program for creating a part on a CNC lathe. Pre-requisite(s): MAC 114 , MAC 121 MAC 131 , and MAC 141 . Co-requisite(s): MAC 122 .
  
  • MAC 181 CNC Mill: Prog Set & Oper

    Lecture: 2 Lab: 6 Clinic: 0 Credits: 4
    This course introduces the development of a simple program for the production of a part on a computer numerical controlled (CNC) milling machine. Topics include blueprints, basic G and M codes, editor software, linear and circular interpolation, CNC lathes, process plan, Machinery Handbook, programming techniques and tool path. Upon completion, students should be able to demonstrate proper industry techniques for developing a simple program for creating a part on a CNC milling machine. Pre-requisite(s): MAC 114 , MAC 121 , MAC 131 , and MAC 141 . Co-requisite(s): MAC 124 .
  
  • MAC 222 Advanced CNC Turning

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers advanced methods in setup and operation of CNC turning centers. Emphasis is placed on programming and production of complex parts. Upon completion, students should be able to demonstrate skills in programming, operations, and setup of CNC turning centers. Pre-requisite(s): MAC 122.  
  
  • MAC 224 Advanced CNC Milling

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers advanced methods in setup and operation of CNC machining centers. Emphasis is placed on programming and production of complex parts. Upon completion, students should be able to demonstrate skills in programming, operations, and setup of CNC machining centers. Pre-requisite(s): MAC 124.  
  
  • MAC 229 CNC Programming

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course provides concentrated study in advanced programming techniques for working with modern CNC machine tools. Topics include custom macros and subroutines, canned cycles, and automatic machining cycles currently employed by the machine tool industry. Upon completion, students should be able to program advanced CNC functions while conserving machine memory. Pre-requisite(s): MAC 121,  MAC 122,  MAC 124,  or MAC 226.
  
  • MAC 231 CAM: CNC Turning

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course introduces Computer Numerical Control graphics programming and concepts for turning center applications. Emphasis is placed on the interaction of menus to develop a shape file in a graphics CAM system and to develop tool path geometry and part geometry. Upon completion, students should be able to develop a job plan using CAM software, including machine selection, tool selection, operational sequence, speed, feed, and cutting depth. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 121 , MEC 110 , MAC 141 , and MAC 141A .
  
  • MAC 232 CAM: CNC Milling

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course introduces Computer Numerical Control graphics programming and concepts for machining center applications. Emphasis is placed on developing a shape file in a graphics CAM system and transferring coded information from CAM graphics to the CNC milling center. Upon completion, students should be able to develop a complete job plan using CAM software to create a multi-axis CNC program. Pre-requisite(s): DMA 010, DMA 020, DMA 030, DMA 040, and DMA 050) and DRE 097 or (EFL 074, EFL 084, and EFL 094), MAC 121 , MAC 141  , MAC 141A , and MEC 110 .
  
  • MAC 234 Adv. Multi-axis Machining

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course includes multi-axis machining using machining centers with multi-axis capabilities. Emphasis is placed on generation of machining center input with a CAM system and setup of pallet changer and rotary system for multi-axis machining fixtures. Upon completion, students should be able to convert CAD to output for multi-axis machining centers, including tooling, setup, and debugging processes. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 114 , MAC 132 , MAC 141 , and MAC 141A . Co-requisite(s): MAC 224  and MAC 234A .
  
  • MAC 234A Adv. Multi-axis Machining Lab

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course covers the application of multi-axis machining using machining centers with multi-axis capabilities. Emphasis is placed on generation of machining center input with a CAM system and setup of pallet changer and rotary system for multi-axis machining fixtures. Upon completion, students should be able to convert CAD to output for multi-axis machining centers, including tooling, setup, and debugging processes. Pre-requisite(s): DMA 010 , DMA 020 , DMA 030 , DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094, MAC 141 , MAC 141A , MAC 142 , and MAC 142A . Co-requisite(s): MAC 234 .
  
  • MAC 248 Production Procedures

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course covers product planning and control and scheduling and routing of operations. Topics include cost-effective production methods, dimensional and statistical quality control, and the tooling and machines required for production. Upon completion, students should be able to plan, set up, and produce cost-effective quality machined parts. Pre-requisite(s): MAC 121.  

Mathematics

  
  • MAT 110 Math Measurement & Literacy

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course provides an activity-based approach that develops measurement skills and mathematical literacy using technology to solve problems for non-math intensive programs. Topics include unit conversions and estimation within a variety of measurement systems; ratio and proportion; basic geometric concepts; financial literacy; and statistics including measures of central tendency, dispersion, and charting of data. Upon completion, students should be able to demonstrate the use of mathematics and technology to solve practical problems, and to analyze and communicate results. Pre-requisite(s): DRE 098  or EFL 074, EFL 084 and EFL 094 and satisfactory completion in one of the following courses: DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050 .
  
  • MAT 121 Algebra/Trigonometry I

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course provides an integrated approach to technology and the skills required to manipulate, display, and interpret mathematical functions and formulas used in problem solving. Topics include the properties of plane and solid geometry, area and volume, and basic proportion applications; simplification, evaluation, and solving of algebraic equations and inequalities and radical functions; complex numbers; right triangle trigonometry; and systems of equations. Upon completion, students will be able to demonstrate the ability to use mathematics and technology for problem-solving, analyzing and communicating results. Pre-requisite(s): DRE 098  or EFL 074,  EFL 084,   and EFL 094  and satisfactory completion of DMA 010,  DMA 020,  DMA 030,  DMA 040,  DMA 050,  and DMA 060 .
  
  • MAT 122 Algebra/Trigonometry II

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course is designed to cover concepts in algebra, function analysis, and trigonometry. Topics include exponential and logarithmic functions, transformations of functions, Law of Sines, Law of Cosines, vectors, and statistics. Upon completion, students should be able to demonstrate the ability to use mathematics and technology for problem-solving, analyzing and communicating results. Pre-requisite(s): DRE 098  or EFL 074, EFL 084,  and EFL 094 and C or better in MAT 121.  
  
  • MAT 143 Quantitative Literacy

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course is designed to engage students in complex and realistic situations involving the mathematical phenomena of quantity, change and relationship, and uncertainty through project- and activity-based assessment. Emphasis is placed on authentic contexts which will introduce the concepts of numeracy, proportional reasoning, dimensional analysis, rates of growth, personal finance, consumer statistics, practical probabilities, and mathematics for citizenship. Upon completion, students should be able to utilize quantitative information as consumers and to make personal, professional, and civic decisions by decoding, interpreting, using, and communicating quantitative information found in modern media and encountered in everyday life. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): Satisfactory completion of DMA 010,  DMA 020,  DMA 030,  DMA 040,  DMA 050  and DRE 098 .
  
  • MAT 152 Statistical Methods I

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course provides a project-based approach to introductory statistics with an emphasis on using real-world data and statistical literacy. Topics include descriptive statistics, correlation and regression, basic probability, discrete and continuous probability distributions, confidence intervals and hypothesis testing. Upon completion, students should be able to use appropriate technology to describe important characteristics of a data set, draw inferences about a population from sample data, and interpret and communicate results. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): Satisfactory completion of DRE 098  and DMA 010,  DMA 020,  DMA 030,  DMA 040,  DMA 050 .
  
  • MAT 171 Precalculus Algebra

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is designed to develop topics which are fundamental to the study of Calculus. Emphasis is placed on solving equations and inequalities, solving systems of equations and inequalities, and analysis of functions (absolute value, radical, polynomial, rational, exponential, and logarithmic) in multiple representations. Upon completion, students should be able to select and use appropriate models and techniques for finding solutions to algebra-related problems with and without technology. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): Satisfactory completion of DRE 098  or EFL 074, EFL 084,  and EFL 094 and DMA 010,  DMA 020,  DMA 030,  DMA 040,  DMA 050,  DMA 060,   DMA 070,  and DMA 080  or a grade of C or better in MAT 121.  
  
  • MAT 172 Precalculus Trigonometry

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is designed to develop an understanding of topics which are fundamental to the study of Calculus. Emphasis is placed on the analysis of trigonometric functions in multiple representations, right and oblique triangles, vectors, polar coordinates, conic sections, and parametric equations. Upon completion, students should be able to select and use appropriate models and techniques for finding solutions to trigonometry-related problems with and without technology. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): Satisfactory completion of DRE 098  or EFL 074, EFL 084, and EFL 094 and a grade of C or better in MAT 171.  
  
  • MAT 223 Applied Calculus

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course provides an introduction to the calculus concepts of differentiation and integration by way of application and is designed for engineering technology students. Topics include limits, slope, derivatives, related rates, areas, integrals, and applications. Upon completion, students should be able to demonstrate an understanding of the use of calculus and technology to solve problems and to analyze and communicate results. Pre-requisite(s): Satisfactory completion of DRE 098  or EFL 074, EFL 084,  and EFL 094 and C or better in MAT 122.  
  
  • MAT 263 Brief Calculus

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is designed to introduce concepts of differentiation and integration and their applications to solving problems. Topics include graphing, differentiation, and integration with emphasis on applications drawn from business, economics, and biological and behavioral sciences. Upon completion, students should be able to demonstrate an understanding of the use of basic calculus and technology to solve problems and to analyze and communicate results. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): C or better in MAT 171.  
  
  • MAT 271 Calculus I

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4


    This course is designed to develop the topics of differential and integral calculus. Emphasis is placed on limits, continuity, derivatives and integrals of algebraic and transcendental functions of one variable. Upon completion, students should be able to select and use appropriate models and techniques for finding solutions to derivative-related problems with and without technology. This course has been approved for transfer under the CAA as a general education course in Mathematics. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): C or better in MAT 172.  

    A student may place directly into MAT 271 if the student has met at least one (1) of the following criteria within the past five (5) years:

    • A score of 2 or higher on the AP Calculus AB Exam.
    • A grade of C or higher in an AP Calculus course and an unweighted HS GPA of 3.0 or higher.
    • A score of 90 or higher on the ACCUPLACER College-Level Math (CLM) test.
    • A score of 46 or higher on the trigonometry section of the ACT Compass Math Placement Test.
    • A score of 600 or higher on the SAT Math (580 prior to 3/1/2016) and a grade of C or higher in the North Carolina
    • Standard Course of Study Pre-Calculus course or an equivalent course from another state.
    • A score of 27 or higher on the ACT Math and a grade of C or higher in the North Carolina
    • A score of 560 or higher on the SAT Subject Test in Mathematics Level 2.

  
  • MAT 272 Calculus II

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is designed to develop advanced topics of differential and integral calculus. Emphasis is placed on the applications of definite integrals, techniques of integration, indeterminate forms, improper integrals, infinite series, conic sections, parametric equations, polar coordinates, and differential equations. Upon completion, students should be able to select and use appropriate models and techniques for finding solutions to integral-related problems with and without technology. This course has been approved for transfer under the CAA as a general education course in Mathematics.  This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): C or better in MAT 271.  
  
  • MAT 273 Calculus III

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is designed to develop the topics of multivariate calculus. Emphasis is placed on multivariate functions, partial derivatives, multiple integration, solid analytical geometry, vector valued functions, and line and surface integrals. Upon completion, students should be able to select and use appropriate models and techniques for finding the solution to multivariate-related problems with and without technology. This course has been approved for transfer under the CAA as a general education course in Mathematics. Pre-requisite(s): C or better in MAT 272.  
  
  • MAT 280 Linear Algebra

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course provides an introduction to linear algebra topics. Emphasis is placed on the development of abstract concepts and applications for vectors, systems of equations, matrices, determinants, vector spaces, multi-dimensional linear transformations, eigenvectors, eigenvalues, diagonalization and orthogonality. Upon completion, students should be able to demonstrate understanding of the theoretical concepts and select and use appropriate models and techniques for finding solutions to linear algebra-related problems with and without technology. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): MAT 271 .
  
  • MAT 285 Differential Equations

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course provides an introduction to topics involving ordinary differential equations. Emphasis is placed on the development of abstract concepts and applications for first-order and linear higher-order differential equations, systems of differential equations, numerical methods, series solutions, eigenvalues and eigenvectors, and LaPlace transforms. Upon completion, students should be able to demonstrate understanding of the theoretical concepts and select and use appropriate models and techniques for finding solutions to differential equations-related problems with and without technology. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in MAT 272.  

Mechanical

  
  • MEC 110 Introduction to CAD/CAM

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces CAD/CAM. Emphasis is placed on transferring part geometry from CAD to CAM for the development of a CNC-ready program. Upon completion, students should be able to use CAD/CAM software to produce a CNC program. Pre-requisite(s): DFT 119  or MAC 121,  DMA 010,  DMA 020,  DMA 030,  DMA 040,  and DMA 050 , and DRE 097  or EFL 074, EFL 084,  and EFL 094.
  
  • MEC 111 Machine Processes I

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course introduces shop safety, hand tools, machine processes, measuring instruments, and the operation of machine shop equipment. Topics include use and care of tools, safety, measuring tools, and the basic setup and operation of common machine tools. Upon completion, students should be able to manufacture simple parts to specified tolerance. Pre-requisite(s): DMA 010 , DMA 020 DMA 030 DMA 040 , and DMA 050  and DRE 097  or EFL 074, EFL 084, and EFL 094.
  
  • MEC 128 CNC Machining Processes

    Lecture: 2 Lab: 4 Clinic: 0 Credits: 4
    This course covers programming, setup, and operations of CNC turning, milling, and other CNC machines. Topics include programming formats, control functions, program editing, and part production and inspection. Upon completion, students should be able to manufacture simple parts using CNC machines.
  
  • MEC 130 Mechanisms

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course introduces the purpose and action of various mechanical devices. Topics include cams, cables, gear trains, differentials, screws, belts, pulleys, shafts, levers, lubricants, and other devices. Upon completion, students should be able to analyze, maintain, and troubleshoot the components of mechanical systems.
  
  • MEC 145 Manufacturing Materials I

    Lecture: 2 Lab: 3 Clinic: 0 Credits: 3
    This course introduces a variety of manufacturing materials and common processing techniques. Emphasis is placed on the processing, testing, and application of materials such as wood, metals, plastics, ceramics, and composites. Upon completion, students should be able to demonstrate an understanding of fundamental engineering applications for a variety of materials, including their process capabilities and limitations.
  
  • MEC 151 Mechanical Mfg Systems

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers mechanical systems and sub-systems including timing cams, cam followers, timing belts, servo-motors, mechanical drive units, bearings, and mechanical linkage. Emphasis will be placed on the understanding of these components and their integration into operating systems. Upon completion, students should be able to diagnose mechanical problems using a structured approach to troubleshooting mechanical systems and sub-systems.
  
  • MEC 161 Manufacturing Processes I

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course provides the fundamental principles of value-added processing of materials into usable forms for the customer. Topics include material properties and traditional and non-traditional manufacturing processes. Upon completion, students should be able to specify appropriate manufacturing processing for common engineering materials.
  
  • MEC 231 Computer-Aided Manufacturing I

    Lecture: 1 Lab: 4 Clinic: 0 Credits: 3
    This course introduces computer-aided design/manufacturing (CAD/CAM) applications and concepts. Topics include software, programming, data transfer and verification, and equipment setup. Upon completion, students should be able to produce parts using CAD / CAM applications. Pre-requisite(s): MAC 121  or MEC 110.  
  
  • MEC 265 Fluid Mechanics

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers the physical behavior of fluids and fluid systems. Topics include fluid statics and dynamics, laminar and turbulent flow, Bernoulli’s Equation, components, applications, and other related topics. Upon completion, students should be able to apply fluid power principles to practical applications. Pre-requisite(s): PHY 131.  
  
  • MEC 267 Thermal Systems

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course introduces the fundamental laws of thermodynamics. Topics include work and energy, open and closed systems, and heat engines. Upon completion, students should be able to demonstrate a knowledge of the laws and principles that apply to thermal power. Pre-requisite(s): PHY 131  or PHY 151.  
  
  • MEC 276 Capstone Design Project

    Lecture: 0 Lab: 3 Clinic: 0 Credits: 1
    This course provides an opportunity for students to utilize all facets of their educational experience to solve an engineering design problem in a multidisciplinary environment. Competencies demonstrated include project planning and organization, engineering analysis and design, selection of materials and processes, economic analysis, communication, and project documentation. Upon completion, students should be able to demonstrate the ability to complete a comprehensive design project, concluding with a formal report. Pre-requisite(s): DFT 154  and EGR 250 

Medical Assisting

  
  • MED 110 Orientation to Medical Assisting

    Lecture: 1 Lab: 0 Clinic: 0 Credits: 1
    This course covers the history of medicine and the role of the medical assistant in the health care setting. Emphasis is placed on professionalism, communication, attitude, behaviors, and duties in the medical environment. Upon completion, students should be able to project a positive attitude and promote the profession of medical assisting. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 114 Professional Interaction in Health Care

    Lecture: 1 Lab: 0 Clinic: 0 Credits: 1
    This course is designed to identify various patient behaviors encountered in the medical setting. Emphasis is placed on stressors related to illness, cultural influences, death and dying, and needs specific to patients. Upon completion, students should be able to utilize appropriate methods of verbal and nonverbal communication with empathy and impartiality. Pre-requisite(s): Admission in the Medical Assisting program.
  
  • MED 116 Introduction to Anatomy & Physiology

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course introduces basic anatomy and physiology. Emphasis is placed on the relationship between body structure and function and the procedures common to health care. Upon completion, students should be able to identify body system components and functions relating this knowledge to the delivery of health care.
  
  • MED 118 Medical Law and Ethics

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course covers legal relationships of physicians and patients, contractual agreements, professional liability, malpractice, medical practice acts, informed consent, and bioethical issues. Emphasis is placed on legal terms, professional attitudes, and the principles and basic concepts of ethics and laws involved in providing medical services. Upon completion, students should be able to meet the legal and ethical responsibilities of a multi-skilled health professional. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 120 Survey of Med Terminology

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course introduces the vocabulary, abbreviations, and symbols used in the language of medicine. Emphasis is placed on building medical terms using prefixes, suffixes, and word roots. Upon completion, students should be able to pronounce, spell, and define accepted medical terms.
  
  • MED 121 Medical Terminology I

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces prefixes, suffixes, and word roots used in the language of medicine. Topics include medical vocabulary and the terms that relate to the anatomy, physiology, pathological conditions, and treatment of selected systems. Upon completion, students should be able to pronounce, spell, and define medical terms as related to selected body systems and their pathological disorders. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 122 Medical Terminology II

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is the second in a series of medical terminology courses. Topics include medical vocabulary and the terms that relate to the anatomy, physiology, pathological conditions, and treatment of selected systems. Upon completion, students should be able to pronounce, spell, and define medical terms as related to selected body systems and their pathological disorders. Pre-requisite(s): Admission in the Medical Assisting program and MED 121 .
  
  • MED 130 Administrative Office Procedures I

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course introduces medical office administrative procedures. Topics include appointment processing, written and oral communications, medical records, patient orientation, and safety. Upon completion, students should be able to perform basic administrative skills within the medical environment. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 131 Administrative Office Procedures II

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course provides medical office procedures in both economic and management skills. Topics include physical plant maintenance, equipment and supplies, liability coverage, medical economics, and introductory insurance procedures. Upon completion, students should be able to manage the economics of the medical office and supervise personnel. Pre-requisite(s): MED 130  and Admission to the Medical Assisting Program.
  
  • MED 140 Exam Room Procedures I

    Lecture: 3 Lab: 4 Clinic: 0 Credits: 5
    This course provides instruction in clinical examining room procedures. Topics include asepsis, infection control, assisting with exams and treatment, patient education, preparation and administration of medications, EKG, vital signs, and medical emergencies. Upon completion, students should be able to demonstrate competence in exam room procedures. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 150 Laboratory Procedures I

    Lecture: 3 Lab: 4 Clinic: 0 Credits: 5
    This course provides instruction in basic lab techniques used by the medical assistant. Topics include lab safety, quality control, collecting and processing specimens, performing selective tests, phlebotomy, screening and follow-up of test results, and OSHA/CLIA regulations. Upon completion, students should be able to perform basic lab tests/skills based on course topics. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 232 Medical Insurance Coding

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course is designed to develop coding skills. Emphasis is placed on advanced diagnostic and procedural coding in the outpatient facility. Upon completion, students should be able to demonstrate proficiency in coding for reimbursement. Students will demonstrate this proficiency in the inpatient facility as well. This course is also intended to prepare students for coding for reimbursement in a hospital or outpatient facilities setting and preparation for the CPC-H exam. Pre-requisite(s): C or better in OST 247  and OST 248 .
  
  • MED 240 Exam Room Procedures II

    Lecture: 3 Lab: 4 Clinic: 0 Credits: 5
    This course is designed to expand and build upon skills presented in MED 140. Emphasis is placed on advanced exam room procedures. Upon completion, students should be able to demonstrate enhanced competence in selected exam room procedures. Pre-requisite(s): Admission to the Medical Assisting Program and MED 140 .
  
  • MED 260 MED Clinical Practicum

    Lecture: 0 Lab: 0 Clinic: 15 Credits: 5
    This course provides the opportunity to apply clinical, laboratory, and administrative skills in a medical facility. Emphasis is placed on enhancing competence in clinical and administrative skills necessary for comprehensive patient care and strengthening professional communications and interactions. Upon completion, students should be able to function as an entry-level health care professional. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 262 Clinical Perspectives

    Lecture: 1 Lab: 0 Clinic: 0 Credits: 1
    This course is designed to explore personal and occupational responsibilities of the practicing medical assistant. Emphasis is placed on problems encountered during externships and development of problem-solving skills. Upon completion, students should be able to demonstrate courteous and diplomatic behavior when solving problems in the medical facility. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 264 Medical Assisting Overview

    Lecture: 2 Lab: 0 Clinic: 0 Credits: 2
    This course provides an overview of the complete medical assisting curriculum. Emphasis is placed on all facets of medical assisting pertinent to administrative, laboratory, and clinical procedures performed in the medical environment. Upon completion, students should be able to demonstrate competence in the areas covered on the national certification examination for medical assistants. Pre-requisite(s): Admission in the Medical Assisting Program.
  
  • MED 270 Symptomatology

    Lecture: 2 Lab: 2 Clinic: 0 Credits: 3
    This course covers the study of disease symptoms and the appropriate actions taken by medical assistants in a medical facility in relation to these symptoms. Emphasis is placed on interviewing skills and appropriate triage, preparing patients for procedures, and screening test results. Upon completion, students should be able to recognize how certain symptoms relate to specific diseases, recognize emergency situations, and take appropriate actions. Pre-requisite(s): Admission to the Medical Assisting Program.
  
  • MED 272 Drug Therapy

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course focuses on major drug groups, including their side effects, interactions, methods of administration, and proper documentation. Emphasis is placed on the theory of drug administration. Upon completion, students should be able to identify, spell, recognize side effects of, and document the most commonly used medications in a physician’s office. Pre-requisite(s): Admission to the Medical Assisting Program and MED 140 .
  
  • MED 276 Patient Education

    Lecture: 1 Lab: 2 Clinic: 0 Credits: 2
    This course is designed to provide communication skills, basic education principles, and knowledge of available community resources and to apply this knowledge to the clinical setting. Emphasis is placed on identifying appropriate community resources, developing patient education materials, and perfecting written and oral communication skills. Upon completion, students should be able to instruct, communicate effectively, and act as a liaison between the patient and community agencies. Pre-requisite(s): Admission to the Medical Assisting Program.

Marketing and Retailing

  
  • MKT 120 Principles of Marketing

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces principles and problems of marketing goods and services. Topics include promotion, placement, and pricing strategies for products. Upon completion, students should be able to apply marketing principles in organizational decision making.
  
  • MKT 123 Fundamentals of Selling

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is designed to emphasize the necessity of selling skills in a modern business environment. Emphasis is placed on sales techniques involved in various types of selling situations. Upon completion, students should be able to demonstrate an understanding of the techniques covered.
  
  • MKT 231 Healthcare Marketing

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This is designed to help students gain an understanding of how the principles of marketing are used in a healthcare setting. Topics include market development, market segmentation, market research, advertising and promotion, and service development for healthcare marketing. Upon completion, students should be able to plan, develop, and implement a basic marketing plan for an institution within the healthcare industry. Pre-requisite(s): MKT 120 .

Maintenance

  
  • MNT 110 Intro to Maintenance Procedures

    Lecture: 1 Lab: 3 Clinic: 0 Credits: 2
    This course covers basic maintenance fundamentals for power transmission equipment. Topics include equipment inspection, lubrication, alignment, and other scheduled maintenance procedures. Upon completion, students should be able to demonstrate knowledge of accepted maintenance procedures and practices according to current industry standards.
  
  • MNT 250 PLC Interfacing

    Lecture: 2 Lab: 4 Clinic: 0 Credits: 4
    This course introduces touch screens, PLC interface devices, and PID loops for applications such as motion control, encoders, and stepping motors. Topics include LVDT control, touch screens, PID controls, and motion controls. Upon completion, students should be able to safely install, program, and maintain touch screens and other interface devices. Pre-requisite(s): ELC 128 .
  
  • MNT 263 Electro-Pneumatic Components

    Lecture: 2 Lab: 4 Clinic: 0 Credits: 4
    This course introduces principles and practical applications of electrical/pneumatic control systems, and primary control devices incorporated in those systems. Emphasis is placed on reading and interpreting ladder diagrams, building control circuits, and troubleshooting valves, switches, and sensors. Upon completion, students should be able to design, build, and troubleshoot basic electro-pneumatic control systems. Pre-requisite(s): ELC 112  and HYD 110 .

Music

  
  • MUS 110 Music Appreciation

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is a basic survey of the music of the Western world. Emphasis is placed on the elements of music, terminology, composers, form, and style within a historical perspective. Upon completion, students should be able to demonstrate skills in basic listening and understanding of the art of music. This course has been approved for transfer under the CAA as a general education course in Humanities/Fine Arts. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): DRE 098  or EFL 074, EFL 084, and EFL 094.
  
  • MUS 111 Fundamentals of Music

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course is an introductory course for students with little or no music background. Emphasis is placed on music notation, rhythmic patterns, scales, key signatures, intervals, and chords. Upon completion, students should be able to demonstrate an understanding of the rudiments of music. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): DRE 098  or EFL 074, EFL 084, and EFL 094.
  
  • MUS 112 Introduction to Jazz

    Lecture: 3 Lab: 0 Clinic: 0 Credits: 3
    This course introduces the origins and musical components of jazz and the contributions of its major artists. Emphasis is placed on the development of discriminating listening habits, as well as the investigation of the styles and structural forms of the jazz idiom. Upon completion, students should be able to demonstrate skills in listening and understanding this form of American music. This course has been approved for transfer under the CAA as a general education course in Humanities/Fine Arts. This is a Universal General Education Transfer Component (UGETC) course. Pre-requisite(s): DRE 098  or EFL 074, EFL 084, and EFL 094.
  
  • MUS 121 Music Theory I

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course provides an in-depth introduction to melody, rhythm, and harmony. Emphasis is placed on fundamental melodic, rhythmic, and harmonic analysis, introduction to part writing, ear-training, and sight-singing. Upon completion, students should be able to demonstrate proficiency in the recognition and application of the above. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement.
  
  • MUS 122 Music Theory II

    Lecture: 3 Lab: 2 Clinic: 0 Credits: 4
    This course is a continuation of studies begun in MUS 121 . Emphasis is placed on advanced melodic, rhythmic, and harmonic analysis and continued studies in part-writing, ear-training, and sight-singing. Upon completion, students should be able to demonstrate proficiency in the recognition and application of the above. This course has been approved for transfer under the CAA as a premajor and/or elective course requirement. Pre-requisite(s): C or better in MUS 121 .
 

Page: 1 <- 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12